Toolkit contains: Tie rod spreader 11/16'' wedge opening, Ball joint separator 15/16'' jaw opening, Pitman arm wedge 1-1/8'' opening, 8'' knurled handle to use with hammer and a 0.401'' Shank to use with an impact gun.

A highly versatile 10 tonne capacity hydraulic puller, both 2 & 3 leg pulling in 3 lengths: 100, 150 & 200mm. The kit also contains a large bearing separator (90-105mm) and 2 sets of extension legs giving a reach of 225mm and 450mm. The hydraulic ram extensions have running centres. Made from chrome Molybdenum HRC 40. Puller set is suitable for many automotive, agricultural and industrial pulling applications. Stored in a steel case. Please Note; Grease suitable for 10702A Ram; Product No. LA68100, Part No. LPS100, Viscosity ISO100, Using for 2000-3000psi, DIN 51524 part1 & part2, Cincinnati Milacron P-68, Denision HF-O

This puller kit contains all the same parts as 10702 but with an additional manual forcing screw (10702S) with running centre and adaptor collar. Made from chrome Molybdenum HRC 40. Stored in a steel case.

All components are interchangeable with 10702. Hardened HRC 42 - 45. To assist with removing press fitted bushes, bearings balls and taper. Press the sharp edges of the separator behind the bearing attach puller 10705; apply pressure on the center bolt until bearing is released by turning the center screw. 10708 Plated and joining bolts, fit onto the bearing.

Drop forged CR-V steel puller arms with locking/gripping feature. Set includes 2 sets of 100mm 2 & 3 leg pullers with locking feature, which clamps the jaws firmly inside/outside the gear or bearing. Includes a 2.5Lb slide hammer. Presented in a plastic storage case.

Readily available sliding legs to pull wheel hubs quickly & easily where the bolt circle does not exceed 190.2mm (7-1/2”), also removes press-fit rear brake drums. Specially designed to use on most models of car. A shock action tool, variable stud-mechanical screw with heavy duty floating plunger hammer type handle. Contains: Hydraulic ram 250mm, Extension ram 50mm, Centering adaptor 5 hub puller legs, Hub puller body 100m, Hammer handle 200mm, Striking handle, and Puller screw.

Has easily adjusting sliding arms to pull wheel hubs quickly and easily. Maximum reach is 190mm bolt circle. Provides a straight pull and will not distort wheel lugs. It is a shock action tool. Striking wrench and puller screw included.

6 Way multi-purpose 10 tonne hydraulic puller kit. Suitable for 2 and 3 leg pulling applications. Can be set up as a short puller with 100mm reach, standard 150mm reach and long 200mm reach plus you can add extensions for extra long reach. The ram extension has a running centre to prevent damage to the work piece. Made from chrome molybdenum HRC 38. Presented in a strong blow-moulded plastic case.