Suitable for most automotive flywheel pilot bearings. Also suitable as bearing and bush puller for generators and starters. Can be used in confined areas. Tommy bar drive is adequate for most applications. Extra force can be applied using a 21mm open end spanner on the collar.

This bearing puller is ideally suited to removing small bearings from shafts quickly and easily. Can be driven with a 14mm socket/spanner but in most cases the tommy bar drive is adequate. Fast fit micro puller.

This bearing separator is ideal for removing bearings, gears, collars etc. It comes complete with 2 sets of extension legs giving a reach of 185mm to 435mm. The forcing screw has a running centre to prevent damage to the shaft. To assist with removing press fitted bushes, bearings ball and taper. Includes bearing separator

All components are interchangeable with 10702. Hardened HRC 42 - 45. To assist with removing press fitted bushes, bearings balls and taper. Press the sharp edges of the separator behind the bearing attach puller 10705; apply pressure on the center bolt until bearing is released by turning the center screw. 10708 Plated and joining bolts, fit onto the bearing.